Gap Bed Between centers: 60” Swing over bed: 22" Spindle speeds: 18 - 1400RPM Spindle bore: 3 1/2" Diameter Chuck mounting: D1 - 11 Tailstock taper: No 5 Morse Execution: Imperial Tool Post: Quick Change 4 holders & keys New 3 Jaw Chuck with standard chuck guard New 2 Axis DRO Coolant and Lovo light
Gap Bed Between centers: 100” Swing over bed: 22" Spindle speeds: 18 - 1400RPM Spindle bore: 3 1/2" Diameter Chuck mounting: D1 - 11 Tailstock taper: No 5 Morse Execution:TBC Tool Post: Quick Change 4 holders & keys 4 Jaw Chuck with standard chuck guard Coolant and Lovo light Fixed steady Fully Refurbished with a 6 month warranty
Gap Bed machine Between centers: 80” Swing over bed: 22" Spindle speeds: 18 - 1400RPM Spindle bore: 3 1/2" Diameter Chuck mounting: D1 - 11 Tailstock taper: No 5 Morse Execution: TBC Tool Post: Quick Change 4 holders 4 Jaw Chuck Fixed Steady Coolant
Distance between centers: 660 mm Swing over bed: 300mm Swing over cross-slide: 200mm Spindle speeds: 22 to 1800 (16) Spindle bore: 40mm Full length screw cutting Chuck mounting: D1 - 4 Tailstock taper: 3 morse Execution: 6 mm Tool post: quick change and 3 tool holders & keys Good 3 jaw chuck 2 axis DRO Interlocked Chuck guard Coolant Good condition the machine is currently being serviced. Approx dimensions: 1400 x 1800 x 900mm
Gap Bed Machine Distance between centers: 30" Swing over bed: 15" Swing over cross-slide: 9" Spindle speeds: 25 to 2000 (16) Spindle bore: 2" clear Full length screw cutting Chuck mounting: D16 Tailstock taper: No. 4 morse New 3 Jaw Coolant New 2 axis DRO Main motor: 7.5 hp Machine fully refurbished (Reground slideways) Chuck guard TBC Approx weight: 1.5 tons Approx dimensions: 7 'x 4' x 5' Quick change tool post and 3 holders
Colchester Triumph 2000 30” between Spindle Speed: 25-2000 RPM Spindle Bore: 54mm Spindle Nose: D1-6 Camlock Gap Bed Metric calibration 2 axis DRO 3 Jaw 4 tool holders Electric brake Slides in good condition Cleaned and serviced
Gap Bed Machine Distance between centers: 50" Swing over bed: 15" Swing over cross-slide: 9" Spindle speeds: 25 to 2000 (16) Spindle bore: 2" clear Full length screw cutting Chuck mounting: D16 Tailstock taper: No. 4 morse 3 and 4 jaw chuck and face plate Coolant 2 axis DRO Main motor: 7.5 hp Machine in good condition Approx weight: 1.5 tons Approx dimensions: 7 'x 4' x 5' Quick change tool post and 3 holders
FULLY REFURBISHED COMPLETE WITH NEW DRIVE!CAPACITY Swing over bed 400mm 15.7" Swing over cross slide 246mm 9.6" Height of centres 195mm 7.7" Swing in gap 585mm 23" Gap width from faceplate 165mm 6.5" Bed length 1270mm 50" Distance between centres 1270mm 50" SPINDLE Spindle nose D1 - 6 Camlock D1 - 6 Camlock Taper in spindle nose bush No 4 MT No 4 MT Spindle bore 54mm 2.1" Maximum spindle speed 2500 rpm 2500 rpm Spindle speed ranges Low 14 - 300 rpm 14 - 300 rpm Medium 36 - 830 rpm 36 - 830 rpm High 109 - 2500 rpm 109 - 2500 rpm Maximum spindle motor power 7.5kW 10 HP Number of Imperial Pitches 56 56 Range of Imperial Pitches 2 - 56 TPI 2 - 56 TPI Number of Diametral Pitches 20 20 Range of Diametral Pitches 8 - 56 DP 8 - 56 DP Number of Metric Pitches 51 51 Range of Metric Pitches 0.2 - 14mm Pitch 0.2 - 14mm Pitch Number of Module Pitches 20 20 Range of Module Pitches 0.2 - 3.5 MOD 0.2 - 3.5 MOD TAILSTOCK Tailstock quill taper No 5 MT No 5 MT Tailstock quill travel 145mm 5.7" 
CAPACITY Swing over bed 400mm 15.7" Swing over cross slide 246mm 9.6" Height of centres 195mm 7.7" Swing in gap 585mm 23" Gap width from faceplate 165mm 6.5" Bed length 1270mm 50" Distance between centres 1270mm 30" SPINDLE Spindle nose D1 - 6 Camlock D1 - 6 Camlock Taper in spindle nose bush No 4 MT No 4 MT Spindle bore 54mm 2.1" Maximum spindle speed 2500 rpm 2500 rpm Spindle speed ranges Low 14 - 300 rpm 14 - 300 rpm Medium 36 - 830 rpm 36 - 830 rpm High 109 - 2500 rpm 109 - 2500 rpm Maximum spindle motor power 7.5kW 10 HP Number of Imperial Pitches 56 56 Range of Imperial Pitches 2 - 56 TPI 2 - 56 TPI Number of Diametral Pitches 20 20 Range of Diametral Pitches 8 - 56 DP 8 - 56 DP Number of Metric Pitches 51 51 Range of Metric Pitches 0.2 - 14mm Pitch 0.2 - 14mm Pitch Number of Module Pitches 20 20 Range of Module Pitches 0.2 - 3.5 MOD 0.2 - 3.5 MOD TAILSTOCK Tailstock quill taper No 5 MT No 5 MT Tailstock quill travel 145mm 5.7" 
Type: 25 x 120 Straight Bed Lathe Distance between centers: 120" Swing over bed: 26" Swing over cross-slide: 16" Spindle speeds: 8.8 to 600 (24) Spindle bore: 4 1/8 Full length screw cutting: yes Chuck mounting: D1-11 Tailstock taper: No.5 Morse 2 axis Newall DRO system Full Length Hydraulic copy unit Click Here To View Under Power
Type: 25 x 72 Straight Bed Lathe Distance between centers: 72" Swing over bed: 26" Swing over cross-slide: 16" Spindle speeds: 7.4 to 600 (24) Spindle bore: 4 1/8 Full length screw cutting: yes Chuck mounting: D1-11 Tailstock taper: No.5 Morse Power compound Power traverse Slide along chuck guard and we have rear splash guarding Main motor: 15kw 3 phase Weight: approx 5 tons Condition: Slideways very good Can also be repainted at extra cost Cleaned and serviced
Straight bed machine
Between centers: 42″
Swing over bed: 13.5″ (343 mm)
Swing over saddle: 8.25″ (209 mm) without guards, up to 14″ (355 mm) over bed
Spindle speeds:- Standard: 12 forward / 6 reverse – 17.5 to 1,400 RPM
- Optional high-speed: 18 forward / 9 reverse – 17.5 to 2,240 RPM
Spindle bore: 1 5/8″ (41 mm)
Chuck mounting: D1‑6 Camlock
Tailstock taper: TBC
Execution: Heavy-duty cast-iron build (~3.2 tonnes)
Tool Post: Quick Change (4 holders & keys)
Chucks: 3-jaw and 4-jaw supplied
Steadies: Fixed steady included
Coolant: Yes (if equipped)
Motor: 5 HP or 7.5 HP 3-phase (some with dual-speed motors or repositioned headstock drive)Feed & Threading:
- Conventional screwcutting gearbox
- Lead screw: ~1 3/8″ diameter, ¼″ pitch
Clutch-reverse, feed trip, gear change handles
Robust apron handwheel
Bed wipers, saddle lock, toolpost and taper-turning attachments (per manuals)
