Fully refurbished / re engineered DSG T25P x 120 Oil Country Lathe C/w, Front & Rear 4 jaw chucks fixed steady hydraulic copy 2 axis DRO coolant
Spindle speed: 18-730 RPM 4 Way Tool post Rear Tool post Complete with turret tooling 3 Jaw Chuck 2 Axis DRO Guarding Coolant Machine in good condition Approx weight: 3 1/2 tons Approx dimensions: 10' x 6' x 5'
CAPACITY Swing over bed 400mm 15.7" Swing over cross slide 246mm 9.6" Height of centres 195mm 7.7" Swing in gap 585mm 23" Gap width from faceplate 165mm 6.5" Bed length 1270mm 50" Distance between centres 1270mm 30" SPINDLE Spindle nose D1 - 6 Camlock D1 - 6 Camlock Taper in spindle nose bush No 4 MT No 4 MT Spindle bore 54mm 2.1" Maximum spindle speed 2500 rpm 2500 rpm Spindle speed ranges Low 14 - 300 rpm 14 - 300 rpm Medium 36 - 830 rpm 36 - 830 rpm High 109 - 2500 rpm 109 - 2500 rpm Maximum spindle motor power 7.5kW 10 HP Number of Imperial Pitches 56 56 Range of Imperial Pitches 2 - 56 TPI 2 - 56 TPI Number of Diametral Pitches 20 20 Range of Diametral Pitches 8 - 56 DP 8 - 56 DP Number of Metric Pitches 51 51 Range of Metric Pitches 0.2 - 14mm Pitch 0.2 - 14mm Pitch Number of Module Pitches 20 20 Range of Module Pitches 0.2 - 3.5 MOD 0.2 - 3.5 MOD TAILSTOCK Tailstock quill taper No 5 MT No 5 MT Tailstock quill travel 145mm 5.7" 
Gap Bed machine Between centers: 80” Swing over bed: 22" Spindle speeds: 18 - 1400RPM Spindle bore: 3 1/2" Diameter Chuck mounting: D1 - 11 Tailstock taper: No 5 Morse Execution: TBC Tool Post: Quick Change 4 holders 4 Jaw Chuck Fixed Steady Coolant
Colchester Mascot 1600 x 100" Gap Bed Lathe Type: Mascot 1600 Serial No: 7/0053/10131 Capacities: Swing Over Bed: 431mm Swing Over Saddle: 266mm Swing in Gap: 711mm Maximum distance Between Centres: 2540mm Spindle Speeds: 20 – 1600rpm Spindle Bore: 74mm Feeds, Sliding: 0.6 – 1mm/rev Surfacing: 0.3 – 0.5mm/rev Screw Cutting: TPI 4 - 72 MOD 8 - 60 Metric 0.4 - 14 DP: 0.3 – 3.5 Tailstock Taper 5MT Motor: 12.5HP Electrics: 415v, 3ph, 50 Cycles Complete With: 4 Jaw Chuck Fixed 3 Point Steady Taper Turning 2 Axis DRO Quick Change Tool Post & Tool Holders Chuck Guard & Rear Splash Guard, Emergency Stop Approximate Dimensions: 4000 x 1300 x 1500mm Approximate Weight: 2750kg
Colchester Mascot 1600 x 80" Gap Bed Lathe Type: Mascot 1600 Serial No: 7/0205/1393 Capacities: Swing Over Bed: 431mm Swing Over Saddle: 266mm Swing in Gap: 711mm Maximum distance Between Centres: 2032mm Spindle Speeds: 20 – 1600rpm Spindle Bore: 74mm Feeds, Sliding: 0.6 – 1mm/rev Surfacing: 0.03 – 0.5mm/rev Screw Cutting: TPI 4 - 72 MOD 8 - 60 Metric 0.4 - 14 DP: 0.3 – 3.5 Tailstock Taper: 5MT Motor: 12.5HP Electrics: 415v, 3ph, 50 Cycles Complete With: 4 Jaw Chuck Fixed 3 Point Steady Taper Turning 2 Axis DRO Quick Change Tool Post & Tool Holders Chuck Guard & Rear Splash Guard, Emergency Stop Approximate Dimensions: 3500 x 1300 x 1500mm Approximate Weight: 2500kg
Model: Master 2500 Distance between centers: 26" Calibration: Imperial Swing over bed: 13" Swing in gap: 19" Swing over cross-slide: 8" Spindle speeds: 30 to 2500 (16) Spindle bore: 1 1/2" clear Full length screw cutting Tailstock taper: No. 3 Morse New Bison 3 jaw chuck Main motor: 5 kw Total horsepower: 5.5 Coolant Splash guards Condition: Fully refurbished 2 Axis DRO Approx weight: 850kg Approx dimensions: 6'x4'x5' 6 month warranty
Straight bed machine
Between centers: 42″
Swing over bed: 13.5″ (343 mm)
Swing over saddle: 8.25″ (209 mm) without guards, up to 14″ (355 mm) over bed
Spindle speeds:- Standard: 12 forward / 6 reverse – 17.5 to 1,400 RPM
- Optional high-speed: 18 forward / 9 reverse – 17.5 to 2,240 RPM
Spindle bore: 1 5/8″ (41 mm)
Chuck mounting: D1‑6 Camlock
Tailstock taper: TBC
Execution: Heavy-duty cast-iron build (~3.2 tonnes)
Tool Post: Quick Change (4 holders & keys)
Chucks: 3-jaw and 4-jaw supplied
Steadies: Fixed steady included
Coolant: Yes (if equipped)
Motor: 5 HP or 7.5 HP 3-phase (some with dual-speed motors or repositioned headstock drive)Feed & Threading:
- Conventional screwcutting gearbox
- Lead screw: ~1 3/8″ diameter, ¼″ pitch
Clutch-reverse, feed trip, gear change handles
Robust apron handwheel
Bed wipers, saddle lock, toolpost and taper-turning attachments (per manuals)
Turning length 1500 mm Turning Ø 255 mm Ø above the bed 460 mm Ø above transversing slide 258 mm Length between centers 1500 mm Type of CNC Siemens 810 X-axis 205 mm Z-axis 1300 mm Max workpiece weight kg Spindle taper Spindle bore 58 mm Number of turrets Number of tools on turret Number of rotating tools Turning speed 3000 rpm Spindle motor power 7.5 kW Tailstock no Bar feeder no ------------------- Length x width x height 2930.0 × 1346.0 × 1545.0 Weight 1825 kg 
Type: 25 x 72 Straight Bed Lathe Distance between centers: 72" Swing over bed: 26" Swing over cross-slide: 16" Spindle speeds: 7.4 to 600 (24) Spindle bore: 4 1/8 Full length screw cutting: yes Chuck mounting: D1-11 Tailstock taper: No.5 Morse Power compound Power traverse Slide along chuck guard and we have rear splash guarding Main motor: 15kw 3 phase Weight: approx 5 tons Condition: Slideways very good Can also be repainted at extra cost Cleaned and serviced
Gap Bed Between centers: 100” Swing over bed: 22" Spindle speeds: 18 - 1400RPM Spindle bore: 3 1/2" Diameter Chuck mounting: D1 - 11 Tailstock taper: No 5 Morse Execution:TBC Tool Post: Quick Change 4 holders & keys 4 Jaw Chuck with standard chuck guard Coolant and Lovo light Fixed steady Fully Refurbished with a 6 month warranty
Complete with: Manual collet chuck Power feeds to long and cross 4 way quick change tool post Rear tool post
