• Model: 1307 x 40 Type: Gap Bed distance between centers: 40" swing over bed: 14" swing in gap: 22" swing over cross-slide: 7" spindle speeds: 20 to 1600 (12) Spindle bore: 2 1/16" Diameter full length screw cutting chuck mounting: D1-6 Tailstock taper: no 3 Morse Calibration: Dual dials Imp machine 3 jaw chuck, 4 jaw chuck fixed steady, travelling steady and drill bracket, coolant and light Slide along guard and rear splash guard Approx weight: 2500 kg
  • Type: gap bed Distance between centers: 5000mm Swing over bed: 1000mm Swing in gap: 1240mm Swing over cross slide: 720mm Spindle speeds: 13 to 1000 RPM Spindle bore: 104 mm clear Full length screw cutting: imperial and metric Chuck mounting: Tool post: 4 way 3 jaw chuck and 4 jaw chuck Fixed steady and travelling steady Faceplates 2 Axis DRO system Slide along chuck guard would be fitted over the chuck
  • Model: M300 Fully refurbished distance between centers: 40" swing over bed: 13" swing over cross-slide: 10" spindle speeds: 40 to2500 (12) Spindle bore: 1.5" full length screw cutting Tool post New 3 jaw chuck main motor: 415v coolant light
  • 355mm Swing Over Bed 225mm Swing Over Cross Slide 1250mm Between Centres 52mm Spindle Bore 40-2200rpm Spindle Speeds hp Motor Equipment   Proto TraK  VL Control 3 Jaw Chuck Quick Change Toolpost and holders Coolant Machine Light Interlocked Chuck Guard Swing over Door
  • Type: 30 x 168”  Straight Bed Lathe   Distance between centers: 168" Swing over bed: 32" Swing over cross-slide: 20" (without cross-slide cover 23") Spindle speeds: 5.3 - 420 RPM Spindle bore: 4" 5/8 Chuck mounting: D1-11 Tool post: 4 way  Chuck: 4 Jaw Screw cutting: Imp/Met Fixed steady: Yes Main motor: 3 phase Total horsepower: 20 In very good condition Approx weight: 6.5 tons Approx dimensions:  26’ x 6’ x 6’
  • Details to follow
  • Model: Triumph 2000 Gap Bed Machine Distance between centers: 30" Swing over bed: 15" Swing over cross-slide: 9" Spindle speeds: 25 to 2000 (16) Spindle bore: 2" clear Full length screw cutting Chuck mounting: D16 Tailstock taper: No. 4 morse Tool post with holders New 3 jaw chuck 2 Axis DRO system ( OPTIONAL at an extra cost ) Main motor: 7.5 hp Total horsepower: 7.55 hp Coolant Approx weight: 1.5 tons Approx dimensions: 7 'x 4' x 5'
  • Year of manufacture 2004 Swing: 457mm Bar Capacity: 45mm Complete with 3 & 4 jaw chucks and also we believe a collet chuck and collets TBC Fanuc Series Oi – TB control 12 station turret with some tooling
  • MODEL: 12B SERIAL No: 15 - 10247 Capacity: Swing Over Bed: 840mm Swing Over Bed Covers: 813mm Swing Over Saddle: 533mm Spindle Speeds: 5 – 640rpm Spindle Bore: 159mm Chuck To Turret Face: 1920mm Feeds: 0.002 – 0.077” Per Rev Motor: 11/35HP Electrics: 415v, 3ph, 50 Cycles Complete With: 710mm 4 Jaw Chuck Taper Turning Screw Cutting 3 Axis Newall DRO 6 No Turret Tool Holders Longitudinal Stop Cross Traverse Stop Lovo Light, Coolant, Guards
  • FULLY REFURBISHED COMPLETE WITH NEW DRIVE!
    CAPACITY
    Swing over bed 400mm 15.7"
    Swing over cross slide 246mm 9.6"
    Height of centres 195mm 7.7"
    Swing in gap 585mm 23"
    Gap width from faceplate 165mm 6.5"
    Bed length 1270mm 50"
    Distance between centres 1270mm 50"
    SPINDLE
    Spindle nose D1 - 6 Camlock D1 - 6 Camlock
    Taper in spindle nose bush No 4 MT No 4 MT
    Spindle bore 54mm 2.1"
    Maximum spindle speed 2500 rpm 2500 rpm
    Spindle speed ranges
         Low 14 - 300 rpm 14 - 300 rpm
         Medium 36 - 830 rpm 36 - 830 rpm
         High 109 - 2500 rpm 109 - 2500 rpm
    Maximum spindle motor power 7.5kW 10 HP
    Number of Imperial Pitches 56 56
    Range of Imperial Pitches 2 - 56 TPI 2 - 56 TPI
    Number of Diametral Pitches 20 20
    Range of Diametral Pitches 8 - 56 DP 8 - 56 DP
    Number of Metric Pitches 51 51
    Range of Metric Pitches 0.2 - 14mm Pitch 0.2 - 14mm Pitch
    Number of Module Pitches 20 20
    Range of Module Pitches 0.2 - 3.5 MOD 0.2 - 3.5 MOD
    TAILSTOCK
    Tailstock quill taper No 5 MT No 5 MT
    Tailstock quill travel 145mm 5.7"
  • Model:         2D Serial No:     8-13525   Capacities: Swing Over Bed:               340mm Swing Over Saddle: 200mm Chuck to Turret Face:        450mm Spindle Speeds:                50 – 2550rpm Spindle Bore:          45mm Feeds:                    0.08 – 0.32mm per rev   Electrics:       415v, 3ph, 50 Cycles   Complete With: Bar Feed Collet Ball Chuck 2 Jaw chuck Rear Tool Post Coolant Lovo Light Guards

Go to Top