• Gap Bed machine Between centers:  80” Swing over bed: 22" Spindle speeds: 18 - 1400RPM Spindle bore: 3 1/2" Diameter Chuck mounting: D1 - 11 Tailstock taper: No 5 Morse Execution: imperial Tool Post: Quick Change 4 holders 4 Jaw Chuck Coolant Fixed steady Note: The tailstock is being machined and painted   Fully Refurbished with a 6 month warranty
  • Gap Bed Machine Distance between centers: 30" Swing over bed: 15" Swing over cross-slide: 9" Spindle speeds: 25 to 2000 (16) Spindle bore: 2" clear Full length screw cutting Chuck mounting: D16 Tailstock taper: No. 4 morse Tool post with holders 3 jaw chuck Main motor: 7.5 hp Total horsepower: 7.55 hp Coolant   Machine in excellent condition
  • Serviced and painted Gap Bed Machine Distance between centers: 50" Swing over bed: 15" Swing over cross-slide: 9" Spindle speeds: 25 to 2000 (16) Spindle bore: 2" clear Full length screw cutting Imp & Metric IMP calibration Chuck mounting: D1 6 Tailstock taper: No. 4 morse Quick change Tool post and 4 holders, keys 3 jaw chuck Coolant Machine in very good condition Main motor: 7.5 hp    Total horsepower: 7.55 hp Approx dimensions: 7 'x 4' x 5'  and weight: 1.5 tons
  • Model: Triumph 2000 Gap Bed Machine Distance between centers: 30" Swing over bed: 15" Swing over cross-slide: 9" Spindle speeds: 25 to 2000 (16) Spindle bore: 2" clear Full length screw cutting Chuck mounting: D16 Tailstock taper: No. 4 morse Tool post with holders New 3 jaw chuck 2 Axis DRO system ( OPTIONAL at an extra cost ) Main motor: 7.5 hp Total horsepower: 7.55 hp Coolant Approx weight: 1.5 tons Approx dimensions: 7 'x 4' x 5'
  • Colchester Triumph 2000 lathe Fully refurbished by Blue Diamond Machine Tools Gap Bed Machine Fully Refurbished Triumph 2000 lathe 50 inches between centers The Colchester Lathe comes complete with a 6 month warranty We can also supply and fit a Newall 2 axis DRO system
  • FULLY REFURBISHED COMPLETE WITH NEW DRIVE!
    CAPACITY
    Swing over bed 400mm 15.7"
    Swing over cross slide 246mm 9.6"
    Height of centres 195mm 7.7"
    Swing in gap 585mm 23"
    Gap width from faceplate 165mm 6.5"
    Bed length 1270mm 50"
    Distance between centres 1270mm 50"
    SPINDLE
    Spindle nose D1 - 6 Camlock D1 - 6 Camlock
    Taper in spindle nose bush No 4 MT No 4 MT
    Spindle bore 54mm 2.1"
    Maximum spindle speed 2500 rpm 2500 rpm
    Spindle speed ranges
         Low 14 - 300 rpm 14 - 300 rpm
         Medium 36 - 830 rpm 36 - 830 rpm
         High 109 - 2500 rpm 109 - 2500 rpm
    Maximum spindle motor power 7.5kW 10 HP
    Number of Imperial Pitches 56 56
    Range of Imperial Pitches 2 - 56 TPI 2 - 56 TPI
    Number of Diametral Pitches 20 20
    Range of Diametral Pitches 8 - 56 DP 8 - 56 DP
    Number of Metric Pitches 51 51
    Range of Metric Pitches 0.2 - 14mm Pitch 0.2 - 14mm Pitch
    Number of Module Pitches 20 20
    Range of Module Pitches 0.2 - 3.5 MOD 0.2 - 3.5 MOD
    TAILSTOCK
    Tailstock quill taper No 5 MT No 5 MT
    Tailstock quill travel 145mm 5.7"
  • Serial No. 39490-11-72 Swing over bed: 19" Swing over cross-slide: 10" Distance between centres: 90" Spindle hole: 80mm clear Spindle nose fitting: D 1-8 Speed range: 8-1400 or 2500 rpm No. spindle speed: 12 Tailstock taper: 5 MT 3 Jaw chuck Taper turning Quick change tool post Lovo light, tooling and coolant Power traverse
  • Model: Type 30 x 216 Serial no.: 39052-10-71 Year of manufacture: 1971 Centre: Height 15" (381mm) Distance between 216" (5486mm) Swing over: Bed 32" (813mm) Cross slide 22" (559mm) Spindle: Speeds: 7.4 - 600rpm Bore 4.5/8" (118mm) Input: 380/440/3/50 AC 20 HP Equipment: Fixed & travelling steadies 4 jaw 30" (762mm) chuck 3 way tool post
  • DSG T 25 x 156 Serial no: 38608-1-71 Spindle speeds: 7.3 to 600 rpm (12) 4 way tool post Power feed to compound slide Rapid traverse to saddle 3 jaw chuck 4 jaw chuck Coolant Lo vo light
  • Type:21 x 48 distance between centers: 48" swing over bed: 21" swing in gap:35" swing over cross-slide: 13" spindle speeds: 7.5 to 600 (18) Spindle bore: 3.5" clear full length screw cutting: yes (imperial and metric) chuck mounting: D1 11   Tailstock taper: No. 5 Morse Execution: imperial / dual dials Tool post: 4 way 3 jaw chuck: yes 2 Axis DRO system main motor:15 hp total horsepower: 15.75 hp Chuck and splash guard: yes Approx weight: 3.75    Approx dimensions: 12''x5'x6' Price Ex works Loaded to suitable transport
  • Capacity 8” x 100” Twin vices self centring DRO to left hand head Overhead guarding Cutter guards Coolant